Главная   Изменения   Спек   Патчи   Исходники   Загрузить   Gear   Bugs and FR  Repocop 

Changes since OpenSSH 4.9:
============================

Security:

 * CVE-2008-1483: Avoid possible hijacking of X11-forwarded connections
   by refusing to listen on a port unless all address families bind
   successfully.

Changes since OpenSSH 4.7:
============================

Security:

 * Disable execution of ~/.ssh/rc for sessions where a command has been
   forced by the sshd_config ForceCommand directive. Users who had
   write access to this file could use it to execute abritrary commands.
   This behaviour was documented, but was an unsafe default and an extra
   hassle for administrators.

New features:

  * Added chroot(2) support for sshd(8), controlled by a new option
    "ChrootDirectory". Please refer to sshd_config(5) for details, and
    please use this feature carefully. (bz#177 bz#1352)
  * Linked sftp-server(8) into sshd(8). The internal sftp server is
    used when the command "internal-sftp" is specified in a Subsystem
    or ForceCommand declaration. When used with ChrootDirectory, the
    internal sftp server requires no special configuration of files
    inside the chroot environment. Please refer to sshd_config(5) for
    more information.
  * Added a "no-user-rc" option for authorized_keys to disable execution
    of ~/.ssh/rc
  * Added a protocol extension method "posix-rename@openssh.com" for
    sftp-server(8) to perform POSIX atomic rename() operations.
    (bz#1400)
  * Removed the fixed limit of 100 file handles in sftp-server(8). The
    server will now dynamically allocate handles up to the number of
    available file descriptors. (bz#1397)
  * ssh(8) will now skip generation of SSH protocol 1 ephemeral server
    keys when in inetd mode and protocol 2 connections are negotiated.
    This speeds up protocol 2 connections to inetd-mode servers that
    also allow Protocol 1 (bz#440)
  * Accept the PermitRootLogin directive in a sshd_config(5) Match
    block. Allows for, e.g. permitting root only from the local
    network.
  * Reworked sftp(1) argument splitting and escaping to be more
    internally consistent (i.e. between sftp commands) and more
    consistent with sh(1). Please note that this will change the
    interpretation of some quoted strings, especially those with
    embedded backslash escape sequences. (bz#778)
  * Support "Banner=none" in sshd_config(5) to disable sending of a
    pre-login banner (e.g. in a Match block).
  * ssh(1) ProxyCommands are now executed with $SHELL rather than
    /bin/sh.
  * ssh(1)'s ConnectTimeout option is now applied to both the TCP
    connection and the SSH banner exchange (previously it just covered
    the TCP connection). This allows callers of ssh(1) to better detect
    and deal with stuck servers that accept a TCP connection but don't
    progress the protocol, and also makes ConnectTimeout useful for
    connections via a ProxyCommand.
  * Many new regression tests, including interop tests against PuTTY's
    plink.
  * Support BSM auditing on Mac OS X

The following bugs have been fixed in this release:

   - scp(1) incorrectly reported "stalled" on slow copies. (bz#799)
   - scp(1) date underflow for timestamps before epoch. (bz#828)
   - scp(1) and sftp(1) progressmeter type fixes. (bz#842)
   - SSH2_MSG_UNIMPLEMENTED packets did not correctly reset the client
     keepalive logic, causing disconnections on servers that did not
     explicitly implement "keepalive@openssh.com". (bz#1307)
   - ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS,
     instead of the current standard RRSIG. (bz#1317)
   - Extract magic buffer size constants in scp(1) to #defines.
     (bz#1333)
   - Correctly drain ACKs when a sftp(1) upload write fails midway,
     avoids a fatal() exit from what should be a recoverable condition.
     (bz#1354)
   - Avoid pointer arithmetic and strict aliasing warnings. (bz#1355)
   - Fixed packet size advertisements. Previously TCP and agent
     forwarding incorrectly advertised the channel window size as the
     packet size, causing fatal errors under some conditions. (bz#1360)
   - Document KbdInteractiveAuthentication in sshd_config(5). (bz#1367)
   - Fixed sftp(1) file handle leak on download when the local file
     could not be opened. (bz#1375)
   - Fixed ssh-keygen(1) selective host key hashing (i.e.
     "ssh-keygen -HF hostname") to not include any IP address in the
     data to be hashed. (bz#1376)
   - Fix clobbering of struct passwd from multiple getpwid calls,
     resulting in fatal errors inside tilde_expand_filename. (bz#1377)
   - Fix parsing of port-forwarding specifications to correctly
     detect errors in either specified port number. (bz#1378)
   - Fix memory leak in ssh(1) ~ escape commandline handling. (bz#1379)
   - Make ssh(1) skip listening on the IPv6 wildcard address when a
     binding address of 0.0.0.0 is used against an old SSH server that
     does not support the RFC4254 syntax for wildcard bind addresses.
     (bz#1381)
   - Remove extra backslashes in the RB_PROTOTYPE macro definition.
     (bz#1385)
   - Support ssh(1) RekeyLimits up to the maximum allowed by the
     protocol: 2**32-1. (bz#1390)
   - Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is
     already done for X11/TCP forwarding sockets. (bz#1392)
   - Fix FD leak that could hang a ssh(1) connection multiplexing
     master. (bz#1398)
   - Improve error messages when hostname resolution fails due to a
     system error. (bz#1417)
   - Make ssh(1) -q option documentation consistent with reality.
     (bz#1427 bz#1429)

Portable OpenSSH bugs fixed:

   - Fixed sshd(8) PAM support not calling pam_session_close(), or
     failing to call it with root privileges. (bz#926)
   - Made sshd(8) use configuration-specified SyslogFacility for
     hosts_access(3) messages for denied connections. (bz#1042)
   - Implement getgrouplist(3) for AIX, enabling NSS LDAP to work on
     this platform. (bz#1081)
   - Fix compilation errors on AIX due to misdefinition of LLONG_MAX.
     (bz#1347)
   - Force use of local glob(3) implementation on Mac OS X and FreeBSD,
     as the platform versions lack features or have unexpected
     behaviour. (bz#1407)
   - Reduce stdout/stderr noise from ssh-copy-id. (bz#1431)
   - Fix activation of OpenSSL engine support when requested in
     configure. (bz#1437)

Changes since OpenSSH 4.6:
============================

Security bugs resolved in this release:

 * Prevent ssh(1) from using a trusted X11 cookie if creation of an
   untrusted cookie fails; found and fixed by Jan Pechanec.

Other changes, new functionality and fixes in this release:

 * sshd(8) in new installations defaults to SSH Protocol 2 only.
   Existing installations are unchanged.

 * The SSH channel window size has been increased, and both ssh(1)
   sshd(8) now send window updates more aggressively. These improves
   performance on high-BDP (Bandwidth Delay Product) networks.

 * ssh(1) and sshd(8) now preserve MAC contexts between packets, which
   saves 2 hash calls per packet and results in 12-16% speedup for
   arcfour256/hmac-md5.

 * A new MAC algorithm has been added, UMAC-64 (RFC4418) as
   "umac-64@openssh.com". UMAC-64 has been measured to be
   approximately 20% faster than HMAC-MD5.

 * A -K flag was added to ssh(1) to set GSSAPIAuthentication=Yes

 * Failure to establish a ssh(1) TunnelForward is now treated as a
   fatal error when the ExitOnForwardFailure option is set.

 * ssh(1) returns a sensible exit status if the control master goes
   away without passing the full exit status. (bz #1261)

 * The following bugs have been fixed in this release:

   - When using a ProxyCommand in ssh(1), set the outgoing hostname with
     gethostname(2), allowing hostbased authentication to work (bz #616)
   - Make scp(1) skip FIFOs rather than hanging (bz #856)
   - Encode non-printing characters in scp(1) filenames.
     these could cause copies to be aborted with a "protocol error"
     (bz #891)
   - Handle SIGINT in sshd(8) privilege separation child process to
     ensure that wtmp and lastlog records are correctly updated
     (bz #1196)
   - Report GSSAPI mechanism in errors, for libraries that support
     multiple mechanisms (bz #1220)
   - Improve documentation for ssh-add(1)'s -d option (bz #1224)
   - Rearrange and tidy GSSAPI code, removing server-only code being
     linked into the client. (bz #1225)
   - Delay execution of ssh(1)'s LocalCommand until after all forwadings
     have been established. (bz #1232)
   - In scp(1), do not truncate non-regular files (bz #1236)
   - Improve exit message from ControlMaster clients. (bz #1262)
   - Prevent sftp-server(8) from reading until it runs out of buffer
     space, whereupon it would exit with a fatal error. (bz #1286)

 * Portable OpenSSH bugs fixed:

   - Fix multiple inclusion of paths.h on AIX 5.1 systems. (bz #1243)
   - Implement getpeereid for Solaris using getpeerucred. Solaris
     systems will now refuse ssh-agent(1) and ssh(1) ControlMaster
     clients from different, non-root users (bz #1287)
   - Fix compilation warnings by including string.h if found. (bz #1294)
   - Remove redefinition of _res in getrrsetbyname.c for platforms that
     already define it. (bz #1299)
   - Fix spurious "chan_read_failed for istate 3" errors from sshd(8),
     a side-effect of the "hang on exit" fix introduced in 4.6p1.
     (bz #1306)
   - pam_end() was not being called if authentication failed (bz #1322)
   - Fix SELinux support when SELinux is in permissive mode. Previously
     sshd(8) was treating SELinux errors as always fatal. (bz #1325)
   - Ensure that pam_setcred(..., PAM_ESTABLISH_CRED) is called before
     pam_setcred(..., PAM_REINITIALIZE_CRED), fixing pam_dhkeys.
     (bz #1339)
   - Fix privilege separation on QNX - pre-auth only, this platform does
     not support file descriptior passing needed for post-auth privilege
     separation. (bz #1343)

Changes since OpenSSH 4.5:
============================

 * sshd now allows the enabling and disabling of authentication
   methods on a per user, group, host and network basis via the
   Match directive in sshd_config.

 * The following bugs have been fixed in this release:

   - Clear SIGALRM when restarting due to SIGHUP. Prevents stray
     signal from taking down sshd if a connection was pending at
     the time SIGHUP was received
   - sftp returned a zero exit status when upload failed due to write
     errors (bugzilla #1252)
   - fixed an inconsistent check for a terminal when displaying scp
     progress meter (bugzilla #1265)
   - Parsing of time values in Match blocks was incorrectly applied
     to the global configuration (bugzilla #1275)
   - Allow multiple forwarding options to work when specified in a
     PermitOpen directive (bugzilla #1267)
   - Interoperate with ssh.com versions that do not support binding
     remote port forwarding sessions to a hostname (bugzilla #1019)

 * Portable OpenSSH bugs fixed:

   - "hang on exit" when background processes are running at the time
     of exit on a ttyful/login session (bugzilla #52)
   - Fix typos in the ssh-rand-helper(8) man page (bugzilla #1259)
   - Check that some SIG records have been returned in getrrsetbyname
     (bugzilla #1281)
   - Fix contrib/findssl for platforms that lack "which" (bugzilla
     #1237)
   - Work around bug in OpenSSL 0.9.8e that broke aes256-ctr,
     aes192-ctr, arcfour256 (bugzilla #1291)

Changes since OpenSSH 4.4:
============================

This is a bugfix only release. No new features have been added.

Security bugs resolved in this release:

 * Fix a bug in the sshd privilege separation monitor that weakened its
   verification of successful authentication. This bug is not known to
   be exploitable in the absence of additional vulnerabilities.

This release includes the following non-security fixes:

 * Several compilation fixes for portable OpenSSH

 * Fixes to Solaris SMF/process contract support (bugzilla #1255)

Thanks to everyone who has contributed patches, reported bugs and
tested releases.

Changes since OpenSSH 4.3:
============================

Security bugs resolved in this release:

 * Fix a pre-authentication denial of service found by Tavis Ormandy,
   that would cause sshd(8) to spin until the login grace time
   expired.

 * Fix an unsafe signal hander reported by Mark Dowd. The signal
   handler was vulnerable to a race condition that could be exploited
   to perform a pre-authentication denial of service. On portable
   OpenSSH, this vulnerability could theoretically lead to
   pre-authentication remote code execution if GSSAPI authentication
   is enabled, but the likelihood of successful exploitation appears
   remote.

 * On portable OpenSSH, fix a GSSAPI authentication abort that could
   be used to determine the validity of usernames on some platforms.

This release includes the following new functionality and fixes:

 * Implemented conditional configuration in sshd_config(5) using the
   "Match" directive. This allows some configuration options to be
   selectively overridden if specific criteria (based on user, group,
   hostname and/or address) are met. So far a useful subset of post-
   authentication options are supported and more are expected to be
   added in future releases.

 * Add support for Diffie-Hellman group exchange key agreement with a
   final hash of SHA256.

 * Added a "ForceCommand" directive to sshd_config(5). Similar to the
   command="..." option accepted in ~/.ssh/authorized_keys, this forces
   the execution of the specified command regardless of what the user
   requested. This is very useful in conjunction with the new "Match"
   option.

 * Add a "PermitOpen" directive to sshd_config(5). This mirrors the
   permitopen="..." authorized_keys option, allowing fine-grained
   control over the port-forwardings that a user is allowed to
   establish.

 * Add optional logging of transactions to sftp-server(8).

 * ssh(1) will now record port numbers for hosts stored in
   ~/.ssh/authorized_keys when a non-standard port has been requested.

 * Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with
   a non-zero exit code) when requested port forwardings could not be
   established.

 * Extend sshd_config(5) "SubSystem" declarations to allow the
   specification of command-line arguments.

 * Replacement of all integer overflow susceptible invocations of
   malloc(3) and realloc(3) with overflow-checking equivalents.

 * Many manpage fixes and improvements

 * New portable OpenSSH-specific features:

   - Add optional support for SELinux, controlled using the
     --with-selinux configure option (experimental)

   - Add optional support for Solaris process contracts, enabled
     using the --with-solaris-contracts configure option (experimental)
     This option will also include SMF metadata in Solaris packages
     built using the "make package" target

   - Add optional support for OpenSSL hardware accelerators (engines),
     enabled using the --with-ssl-engine configure option.

 * Bugs from http://bugzilla.mindrot.org fixed:
    #482  - readconf doesn't accept paths with spaces in them.
    #906  - syslog messages from sshd [net] lost.
    #975  - Kerberos authentication timing can leak information
            about account validity.
    #981  - Flow stop in SSH2.
    #1102 - C program 'write' with zero length hangs.
    #1129 - sshd hangs for command-only invocations due to
            fork/child signals.
    #1131 - error "buffer_append_space:alloc not supported"
    #1138 - Passphrase asked for (but ignored) if key file permissions
            too liberal..
    #1156 - Closes connection after C-c is pressed on QNX.
    #1157 - ssh-keygen doesn't handle DOS line breaks.
    #1159 - %u and %h not handled in IdentityFile.
    #1161 - scp -r fails.
    #1162 - Inappropriate sequence of syslog messages.
    #1166 - openssh-4.3p1 has some issues compiling.
    #1171 - configure can't always figure out LLONG_MAX..
    #1173 - scp reports lost connection for very large files.
    #1177 - Incorrect sshrc file location in Makefile.in.
    #1179 - sshd incorrectly rejects  connections due to IP options.
    #1181 - configure should detect when openssl-0.9.8x needs -ldl.
    #1186 - ssh tries multiple times to open unprotected keys.
    #1188 - keyboard-interactive should not allow retry after
            pam_acct_mgmt fails.
    #1193 - Open ssh will not allow changing of passwords on usernames
            greater than 8 characters..
    #1201 - Bind address information is not specified in command line
            help messages.
    #1203 - configure.ac is missing an open [.
    #1207 - sshd does not clear unsuccessful login count on
            non-interactive logins.
    #1218 - GSSAPI client code permits SPNEGO usage.
    #1221 - Banner only suppressed at log level = QUIET (used to be
            at log level < INFO).

 * Fixes to memory and file descriptor leaks reported by the Coverity
   static analysis tool

 * Fixes to inconsistent pointer checks reported by the Stanford
   SATURN tool

Thanks to everyone who has contributed patches, reported bugs and
tested releases.

Changes since OpenSSH 4.2:
============================

Security bugs resolved in this release:

 * CVE-2006-0225: scp (as does rcp, on which it is based) invoked a
   subshell to perform local to local, and remote to remote copy
   operations. This subshell exposed filenames to shell expansion
   twice; allowing a local attacker to create filenames containing
   shell metacharacters that, if matched by a wildcard, could lead
   to execution of attacker-specified commands with the privilege of
   the user running scp (Bugzilla #1094)

This is primarily a bug-fix release, only one new feature has been
added:

 * Add support for tunneling arbitrary network packets over a
   connection between an OpenSSH client and server via tun(4) virtual
   network interfaces. This allows the use of OpenSSH (4.3+) to create
   a true VPN between the client and server providing real network
   connectivity at layer 2 or 3. This feature is experimental and is
   currently supported on OpenBSD, Linux, NetBSD (IPv4 only) and
   FreeBSD. Other operating systems with tun/tap interface capability
   may be added in future portable OpenSSH releases. Please refer to
   the README.tun file in the source distribution for further details
   and usage examples.

Some of the other bugs resolved and internal improvements are:

 * Reduce default key length for new DSA keys generated by ssh-keygen
   back to 1024 bits. DSA is not specified for longer lengths and does
   not fully benefit from simply making keys longer. As per FIPS 186-2
   Change Notice 1, ssh-keygen will refuse to generate a new DSA key
   smaller or larger than 1024 bits

 * Fixed X forwarding failing to start when a the X11 client is executed
   in background at the time of session exit (Bugzilla #1086)

 * Change ssh-keygen to generate a protocol 2 RSA key when invoked
   without arguments (Bugzilla #1064)

 * Fix timing variance for valid vs. invalid accounts when attempting
   Kerberos authentication (Bugzilla #975)

 * Ensure that ssh always returns code 255 on internal error (Bugzilla
   #1137)

 * Cleanup wtmp files on SIGTERM when not using privsep (Bugzilla #1029)

 * Set SO_REUSEADDR on X11 listeners to avoid problems caused by
   lingering sockets from previous session (X11 applications can
   sometimes not connect to 127.0.0.1:60xx) (Bugzilla #1076)

 * Ensure that fds 0, 1 and 2 are always attached in all programs, by
   duping /dev/null to them if necessary.

 * Xauth list invocation had bogus "." argument (Bugzilla #1082)

 * Remove internal assumptions on key exchange hash algorithm and output
   length, preparing OpenSSH for KEX methods with alternate hashes.

 * Ignore junk sent by a server before  it sends the "SSH-" banner
   (Bugzilla #1067)

 * The manpages has been significantly improves and rearranged, in
   addition to other specific manpage fixes:
   #1037 - Man page entries for -L and -R should mention -g.
   #1077 - Descriptions for "ssh -D" and DynamicForward should mention
           they can specify "bind_address" optionally.
   #1088 - Incorrect descriptions in ssh_config man page for
           ControlMaster=no.
   #1121 - Several corrections for ssh_agent manpages

 * Lots of cleanups, including fixes to memory leaks on error paths
   (Bugzilla #1109, #1110, #1111 and more) and possible crashes (#1092)

 * Portable OpenSSH-specific fixes:

   - Pass random seed during re-exec for each connection: speeds up
     processing of new connections on platforms using the OpenSSH's
     builtin entropy collector (ssh-rand-helper)

   - PAM fixes and improvements:
     #1045 - Missing option for ignoring the /etc/nologin file
     #1087 - Show PAM password expiry message from LDAP on login
     #1028 - Forward final non-query conversations to client
     #1126 - Prevent user from being forced to change an expired
             password repeatedly on AIX in some PAM configurations.
     #1045 - Do not check /etc/nologin when PAM is enabled, instead
             allow PAM to handle it.  Note that on platforms using
             PAM, the pam_nologin module should be used in sshd's
             session stack in order to maintain past behaviour

   - Portability-related fixes:
     #989  - Fix multiplexing regress test on Solaris
     #1097 - Cross-compile fixes.
     #1096 - ssh-keygen broken on HPUX.
     #1098 - $MAIL being set incorrectly for HPUX server login.
     #1104 - Compile error on Tru64 Unix 4.0f
     #1106 - Updated .spec file and startup for SuSE.
     #1122 - Use _GNU_SOURCE define in favor of __USE_GNU, fixing
             compilation problems on glibc 2.4

Thanks to everyone who has contributed patches, reported bugs or test
releases.

Changes since OpenSSH 4.1:
============================

  - SECURITY: Fix a bug introduced in OpenSSH 4.0 that caused
    GatewayPorts to be incorrectly activated for dynamic ("-D") port
    forwardings when no listen address was explicitly specified.

  - SECURITY: sshd in OpenSSH versions prior to 4.2 allow GSSAPI
    credentials to be delegated to users who log in with methods
    other than GSSAPI authentication (e.g. public key) when the
    client requests it. This behaviour has been changed in OpenSSH
    4.2 to only delegate credentials to users who authenticate
    using the GSSAPI method. This eliminates the risk of credentials
    being inadvertently exposed to an untrusted user/host (though
    users should not activate GSSAPIDelegateCredentials to begin
    with when the remote user or host is untrusted)

  - Added a new compression method that delays the start of zlib
    compression until the user has been authenticated successfully.
    The new method ("Compression delayed") is on by default in the
    server. This eliminates the risk of any zlib vulnerability
    leading to a compromise of the server from unauthenticated users.

    NB. Older OpenSSH (<3.5) versions have a bug that will cause them
    to refuse to connect to any server that does not offer compression
    when the client has compression requested. Since the new "delayed"
    server mode isn't supported by these older clients, they will
    refuse to connect to a new server unless compression is disabled
    (on the client end) or the original compression method is enabled
    on the server ("Compression yes" in sshd_config)

  - Another round of proactive changes for signed vs unsigned integer
    bugs has been completed, including changing the atomicio() API to
    encourage safer programming. This work is ongoing.

  - Added support for the improved arcfour cipher modes from
    draft-harris-ssh-arcfour-fixes-02. The improves the cipher's
    resistance to a number of attacks by discarding early keystream
    output.

  - Increase the default size of new RSA/DSA keys generated by
    ssh-keygen from 1024 to 2048 bits.

  - Many bugfixes and improvements to connection multiplexing,
    including:

    - Added ControlMaster=auto/autoask options to support opportunistic
      multiplexing (see the ssh_config(5) manpage for details).

    - The client will now gracefully fallback to starting a new TCP
      connection if it cannot connect to a specified multiplexing
      control socket

    - Added %h (target hostname), %p (target port) and %r (remote
      username) expansion sequences to ControlPath. Also allow
      ControlPath=none to disable connection multiplexing.

    - Implemented support for X11 and agent forwarding over multiplexed
      connections. Because of protocol limitations, the slave
      connections inherit the master's DISPLAY and SSH_AUTH_SOCK rather
      than distinctly forwarding their own.

  - Portable OpenSSH: Added support for long passwords (> 8-char) on
    UnixWare 7.

  - The following bugs from http://bugzilla.mindrot.org/ were closed:

     #471  - Misleading error message if /dev/tty perms wrong
     #623  - Don't use $HOME in manpages
     #829  - Don't allocate a tty if -n option is set
     #1025 - Correctly handle disabled special character in ttymodes
     #1033 - Fix compile-time warnings
     #1046 - AIX 5.3 Garbage on Login
     #1054 - Don't terminate connection on getpeername() failure
     #1076 - GSSAPIDelegateCredentials issue mentioned above

  - Lots of other improvements and fixes. Please refer to the ChangeLog
    for details

Thanks to everyone who has contributed patches, problem or test reports.

Changes since OpenSSH 4.0:
============================

* This is a bugfix release, no new features have been added. Some notable
  fixes are:

  - Fix segfault when using forwardings configured in ssh_config(5) and
    ClearAllForwardings (bugzilla #996)

  - Limit input buffer size for channels. A peer could send more data
    than the buffer code was willing to accept. This would cause OpenSSH
    to abort the connection (bugzilla #896)

* Several improvements to the regression tests

* Portable OpenSSH:

  - OpenSSH will now always normalise IPv4 in IPv6 mapped addresses back to
    IPv4 addresses. This means that IPv4 addresses in log messages on IPv6
    enabled machines will no longer be prefixed by "::ffff:" and AllowUsers,
    DenyUsers, AllowGroups, DenyGroups will match IPv4-style addresses only
    for 4-in-6 mapped connections. This ensures a consistent representation
    of IPv4 addresses regardless of whether or not the machine is IPv6
    enabled.

* Other bugfixes, including bugzilla #950, #997, #998, #999, #1005, #1006,
  #1024, and #1038

Changes since OpenSSH 3.9:
============================

* ssh(1) now allows the optional specification of an address to bind to
  in port forwarding connections (local, remote and dynamic). Please
  refer to the documentation for the -L and -R options in the ssh(1)
  manual page and the LocalForward and RemoteForward options in the
  ssh_config(5) manpage. (Bugzilla #413)

* To control remote bindings while retaining backwards compatibility,
  sshd(8)'s GatewayPorts option has been extended. To allow client
  specified bind addresses for remote (-R) port forwardings, the server
  must be configured with "GatewayPorts clientspecified".

* ssh(1) and ssh-keyscan(1) now support hashing of host names and
  addresses added to known_hosts files, controlled by the ssh(1)
  HashKnownHosts configuration directive. This option improves user
  privacy by hiding which hosts have been visited. At present this
  option is off by default, but may be turned on once it receives
  sufficient testing.

* Added options for managing keys in known_hosts files to ssh-keygen(1),
  including the ability to search for hosts by name, delete hosts by
  name and convert an unhashed known_hosts file into one with hashed
  names. These are particularly useful for managing known_hosts files
  with hashed hostnames.

* Improve account and password expiry support in sshd(8). Ther server
  will now warn in advance for both account and password expiry.

* sshd(8) will now log the source of connections denied by AllowUsers,
  DenyUsers, AllowGroups and DenyGroups (Bugzilla #909)

* Added AddressFamily option to sshd(8) to allow global control over
  IPv4/IPv6 usage. (Bugzilla #989)

* Improved sftp(1) client, including bugfixes and optimisations for the
  ``ls'' command and command history and editing support using libedit.

* Improved the handling of bad data in authorized_keys files,
  eliminating fatal errors on corrupt or very large keys. (Bugzilla
  #884)

* Improved connection multiplexing support in ssh(1). Several bugs
  have been fixed and a new "command mode" has been added to allow the
  control of a running multiplexing master connection, including
  checking that it is up, determining its PID and asking it to exit.

* Have scp(1) and sftp(1) wait for the spawned ssh to exit before they
  exit themselves.  This prevents ssh from being unable to restore
  terminal modes (not normally a problem on OpenBSD but common with
  -Portable on POSIX platforms). (Bugzilla #950)

* Portable OpenSSH:

  - Add *EXPERIMENTAL* BSM audit support for Solaris systems
    (Bugzilla #125)

  - Enable IPv6 on AIX where possible (see README.platform for
    details), working around a misfeature of AIX's getnameinfo.
    (Bugzilla #835)

  - Teach sshd(8) to write failed login records to btmp for
    unsuccessful auth attempts. Currently this is only for password,
    keyboard-interactive and challenge/response authentication methods
    and only on Linux and HP-UX.

  - sshd(8) now sends output from failing PAM session modules to the
    user before exiting, similar to the way /etc/nologin is handled

  - Store credentials from gssapi-with-mic authentication early enough
    to be available to PAM session modules when privsep=yes.

Changes since OpenSSH 3.8:
============================

* Added new "IdentitiesOnly" option to ssh(1), which specifies that it should
  use keys specified in ssh_config, rather than any keys in ssh-agent(1)

* Make sshd(8) re-execute itself on accepting a new connection. This security
  measure ensures that all execute-time randomisations are reapplied for each
  connection rather than once, for the master process' lifetime. This includes
  mmap and malloc mappings, shared library addressing, shared library mapping
  order, ProPolice and StackGhost cookies on systems that support such things

* Add strict permission and ownership checks to programs reading ~/.ssh/config
  NB ssh(1) will now exit instead of trying to process a config with poor
  ownership or permissions

* Implemented the ability to pass selected environment variables between the
  client and the server. See "AcceptEnv" in sshd_config(5) and "SendEnv" in
  ssh_config(5) for details

* Added a "MaxAuthTries" option to sshd(8), allowing control over the maximum
  number of authentication attempts permitted per connection

* Added support for cancellation of active remote port forwarding sessions.
  This may be performed using the ~C escape character, see "Escape Characters"
  in ssh(1) for details

* Many sftp(1) interface improvements, including greatly enhanced "ls" support
  and the ability to cancel active transfers using SIGINT (^C)

* Implement session multiplexing: a single ssh(1) connection can now carry
  multiple login/command/file transfer sessions. Refer to the "ControlMaster"
  and "ControlPath" options in ssh_config(5) for more information

* The sftp-server has improved support for non-POSIX filesystems (e.g. FAT)

* Portable OpenSSH: Re-introduce support for PAM password authentication, in
  addition to the keyboard-interactive driver. PAM password authentication
  is less flexible, and doesn't support pre-authentication password expiry but
  runs in-process so Kerberos tokens, etc are retained

* Improved and more extensive regression tests

* Many bugfixes and small improvements

Changes since OpenSSH 3.7.1:
============================

* sshd(8) now supports forced changes of expired passwords via
  /usr/bin/passwd or keyboard-interactive authentication.

  Note for AIX: sshd will now deny password access to accounts with
  passwords expired longer than their maxexpired attribute.  For
  details, see the AIX section in README.platform.

* ssh(1) now uses untrusted cookies for X11-Forwarding.
  Some X11 applications might need full access to the X11 server,
  see ForwardX11Trusted in ssh(1) and xauth(1) for more information.

* ssh(1) now supports sending application layer
  keep-alive messages to the server.  See ServerAliveInterval
  in ssh(1) for more information.

* Improved sftp(1) batch file support.

* New KerberosGetAFSToken option for sshd(8).

* Updated /etc/moduli file and improved performance for
  protocol version 2.

* Support for host keys in DNS (draft-ietf-secsh-dns-xx.txt).
  Please see README.dns in the source distribution for details.

* Fix a number of memory leaks.

* The experimental "gssapi" support has been replaced with
  the "gssapi-with-mic" to fix possible MITM attacks.
  The two versions are not compatible.

Changes since OpenSSH 3.6.1:
============================

* The entire OpenSSH code-base has undergone a license review. As
  a result, all non-ssh1.x code is under a BSD-style license with no
  advertising requirement. Please refer to README in the source
  distribution for the exact license terms.

* Rhosts authentication has been removed in ssh(1) and sshd(8).

* Changes in Kerberos support:

    - KerberosV password support now uses a file cache instead of
      a memory cache.

    - KerberosIV and AFS support has been removed.

    - KerberosV support has been removed from SSH protocol 1.

    - KerberosV password authentication support remains for SSH
      protocols 1 and 2.

    - This release contains some GSSAPI user authentication support
      to replace legacy KerberosV authentication support. At present
      this code is still considered experimental and SHOULD NOT BE
      USED.

* Changed order that keys are tried in public key authentication.
  The ssh(1) client tries the keys in the following order:

     1. ssh-agent(1) keys that are found in the ssh_config(5) file
     2. remaining ssh-agent(1) keys
     3. keys that are only listed in the ssh_config(5) file

  This helps when an ssh-agent(1) has many keys, where the sshd(8)
  server might close the connection before the correct key is tried.

* SOCKS5 support has been added to the dynamic forwarding mode
  in ssh(1).

* Removed implementation barriers to operation of SSH over SCTP.

* sftp(1) client can now transfer files with quote characters in
  their filenames.

* Replaced sshd(8)'s VerifyReverseMapping with UseDNS option.
  When UseDNS option is on, reverse hostname lookups are always
  performed.

* Fix a number of memory leaks.

* Support for sending tty BREAK over SSH protocol 2.

* Workaround for other vendor bugs in KEX guess handling.

* Support for generating KEX-GEX groups (/etc/moduli) in ssh-keygen(1).

* Automatic re-keying based on amount of data sent over connection.

* New AddressFamily option on client to select protocol to use (IPv4
  or IPv6).

* Experimental support for the "aes128-ctr", "aes192-ctr", and
  "aes256-ctr" ciphers for SSH protocol 2.

* Experimental support for host keys in DNS (draft-ietf-secsh-dns-xx.txt).
  Please see README.dns in the source distribution for details.

* Portable OpenSSH:

    - Replace PAM password authentication kludge with a more correct
      PAM challenge-response module from FreeBSD.

    - PAM support may now be enabled/disabled at runtime using the
      UsePAM directive.

    - Many improvements to the OpenSC smartcard support.

    - Regression tests now work with portable OpenSSH.
      Please refer to regress/README.regress in the source distribution.

    - On platforms that support it, portable OpenSSH now honors the
      UMASK, PATH and SUPATH attributes set in /etc/default/login.

    - Deny access to locked accounts, regardless of authentication
      method in use.