Sisyphus repository
Last update: 22 october 2021 | SRPMs: 17371 | Visits: 22133456
en ru br
ALT Linux repos
S:4.3.4-alt1

Group :: System/Kernel and hardware
RPM: linux-gpib

 Main   Changelog   Spec   Patches   Sources   Download   Gear   Bugs and FR  Repocop 

Patch: port-to-python3.patch
Download


diff --git a/linux-gpib/language/python/gpibtest.py b/linux-gpib/language/python/gpibtest.py
index 6050f42..a9ba3b1 100644
--- a/linux-gpib/language/python/gpibtest.py
+++ b/linux-gpib/language/python/gpibtest.py
@@ -10,7 +10,7 @@ v.write('D0 Q0')
 sleep(1)
 
 for i in range(0,10):
-	print v.read()
+	print(v.read())
 
 
 
diff --git a/linux-gpib/language/python/setup.py b/linux-gpib/language/python/setup.py
index 839f14a..598bd15 100644
--- a/linux-gpib/language/python/setup.py
+++ b/linux-gpib/language/python/setup.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 
 from distutils.core import setup,Extension
 setup(name="gpib",
diff --git a/linux-gpib/language/python/srq_board.py b/linux-gpib/language/python/srq_board.py
index ed70b81..b0f2175 100644
--- a/linux-gpib/language/python/srq_board.py
+++ b/linux-gpib/language/python/srq_board.py
@@ -17,10 +17,10 @@ def initialise_device(handle):            # set up device to assert SRQ/RQS
         return
 
 def show_devid(handle):                   # Show device ID
-        print query(handle,"*IDN?")      
+        print(query(handle,"*IDN?"))      
         return
 
-print gpib.version()                      # Show package version
+print(gpib.version())                      # Show package version
 ud = gpib.dev(board,device)               # Open the device
 gpib.config(board,gpib.IbcTMO, gpib.T30s) # Set timeout to 30 seconds
 show_devid(ud);
@@ -29,18 +29,18 @@ gpib.write(handle,"*TST;*OPC")            # Initiate selftest and request OPC
 # Wait for Timeout or Service Request on board
 sta = gpib.wait(board, gpib.TIMO | gpib.SRQI)
 if (sta & gpib.TIMO) != 0:
-   print "Timed out"
+   print("Timed out")
 else:
-  print "SRQ asserted "
+  print("SRQ asserted ")
 # For each device which might pull SRQ
   stb = gpib.serial_poll(ud)            # Read status byte
-  print "stb = %#x"%(stb)
+  print("stb = %#x"%(stb))
   if (stb & gpib.IbStbRQS) != 0:        # Check for RQS bit
-    print "Device asserted RQS"
+    print("Device asserted RQS")
     if (stb & gpib.IbStbESB) != 0:      # Check for Event Status bit
             esr = int(query(ud,"ESR?")) # Read Event Status Register
             if (esr & 1) != 0:          # Check for operation completed
-                    print "Device Operation Completed"
+                    print("Device Operation Completed")
 
 # done  
 gpib.close(ud)
diff --git a/linux-gpib/language/python/srq_device.py b/linux-gpib/language/python/srq_device.py
index d05734c..1357ca6 100644
--- a/linux-gpib/language/python/srq_device.py
+++ b/linux-gpib/language/python/srq_device.py
@@ -17,10 +17,10 @@ def initialise_device(handle):         # set up device to assert SRQ/RQS
         return
 
 def show_devid(handle):                # Show device ID
-        print query(handle,"*IDN?")      
+        print(query(handle,"*IDN?"))      
         return
 
-print gpib.version()                   # Show package version
+print(gpib.version())                   # Show package version
 ud = gpib.dev(board,device)            # Open the device
 gpib.config(board,gpib.IbcAUTOPOLL,1)  # Enable automatic serial polling
 gpib.config(ud,gpib.IbcTMO, gpib.T30s) # Set timeout to 30 seconds
@@ -30,15 +30,15 @@ gpib.write(handle,"*TST;*OPC")         # Selftest and request OPC event
 # Wait for Timeout or Request Service on device
 sta = gpib.wait(ud, gpib.TIMO | gpib.RQS)
 if (sta & gpib.TIMO) != 0:
-   print "Timed out"
+   print("Timed out")
 else:
-    print "Device asserted RQS"
+    print("Device asserted RQS")
     stb = gpib.serial_poll(ud)          # Read status byte
-    print "stb = %#x"%(stb)
+    print("stb = %#x"%(stb))
     if (stb & gpib.IbStbESB) != 0:      # Check for Event Status bit
             esr = int(query(ud,"ESR?")) # Read Event Status Register
             if (esr & 1) != 0:          # Check for operation completed
-                    print "Device Operation Completed"
+                    print("Device Operation Completed")
 
 # done  
 gpib.close(ud)
-- 
2.25.2
 
design & coding: Vladimir Lettiev aka crux © 2004-2005, Andrew Avramenko aka liks © 2007-2008
current maintainer: Michael Shigorin