--- gdm-40.beta/data/Xsession.in.XSession	2021-02-26 02:30:08.447392670 +0300
+++ gdm-40.beta/data/Xsession.in	2021-02-26 02:39:07.389571282 +0300
@@ -29,201 +29,18 @@
 # good for debugging where things went wrong
 echo "$0: Beginning session setup..."
 
-# First read /etc/profile (resp. /usr/etc/profile) and .profile
-if [ -f /etc/profile ]; then
-  . /etc/profile
-elif [ -f /usr/etc/profile ]; then
-  . /usr/etc/profile
-fi
-test -f "$HOME/.profile" && . "$HOME/.profile"
-# Second read /etc/xprofile (resp. /usr/etc/xprofile)  and .xprofile for X specific setup
-if [ -f /etc/xprofile ]; then
-  . /etc/xprofile
-elif [ -f /usr/etc/xprofile ]; then
-  . /usr/etc/xprofile
-
-fi
-test -f "$HOME/.xprofile" && . "$HOME/.xprofile"
-
-# Translation stuff
-if [ -x "@libexecdir@/gdmtranslate" ] ; then
-  gdmtranslate="@libexecdir@/gdmtranslate"
-else
-  gdmtranslate=
-fi
-
-# Note that this should only go to zenity dialogs which always expect utf8
-gettextfunc () {
-  if [ "x$gdmtranslate" != "x" ] ; then
-    "$gdmtranslate" --utf8 "$1"
-  else
-    echo "$1"
-  fi
-}
-
-OLD_IFS=$IFS
-
-gdmwhich () {
-  COMMAND="$1"
-  OUTPUT=
-  IFS=:
-  for dir in $PATH
-  do
-    if test -x "$dir/$COMMAND" ; then
-      if test "x$OUTPUT" = "x" ; then
-        OUTPUT="$dir/$COMMAND"
-      fi
-    fi
-  done
-  IFS=$OLD_IFS 
-  echo "$OUTPUT"
-}
-
-zenity=`gdmwhich zenity`
-
-# Note: ~/.xsession-errors is now done in the daemon so that it
-# works for ALL sessions (except ones named 'Failsafe')
-
-# clean up after xbanner
-freetemp=`gdmwhich freetemp`
-if [ -n "$freetemp" ] ; then
-	"$freetemp"
-fi
-
-userresources="$HOME/.Xresources"
-usermodmap="$HOME/.Xmodmap"
-userxkbmap="$HOME/.Xkbmap"
-
-if [ -f /etc/X11/Xresources ]; then
-    sysresources=/etc/X11/Xresources
-else
-    sysresources=/usr/etc/X11/Xresources
-fi
-
-if [ -f /etc/X11/Xmodmap ]; then
-    sysmodmap=/etc/X11/Xmodmap
-else
-    sysmodmap=/usr/etc/X11/Xmodmap
-fi
-
-if [ -f /etc/X11/Xkbmap ]; then
-    sysxkbmap=/etc/X11/Xkbmap
-else
-    sysxkbmap=/usr/etc/X11/Xkbmap
-fi
-
-rh6sysresources=/etc/X11/xinit/Xresources 
-rh6sysmodmap=/etc/X11/xinit/Xmodmap 
-
-# merge in defaults
-if [ -f "$rh6sysresources" ]; then
-    xrdb -nocpp -merge "$rh6sysresources"
-fi
-
-if [ -f "$sysresources" ]; then
-    xrdb -nocpp -merge "$sysresources"
-fi
-
-if [ -f "$userresources" ]; then
-    xrdb -nocpp -merge "$userresources"
-fi
+# read /etc/profile and .bash_profile
+test -f /etc/profile && . /etc/profile
+test -f "$HOME/.bash_profile" && . "$HOME/.bash_profile"
 
-# merge in keymaps
-if [ -f "$sysxkbmap" ]; then
-    setxkbmap `cat "$sysxkbmap"`
-    XKB_IN_USE=yes
-fi
-
-if [ -f "$userxkbmap" ]; then
-    setxkbmap `cat "$userxkbmap"`
-    XKB_IN_USE=yes
-fi
-
-#
-# Eeek, this seems like too much magic here
-#
-if [ -z "$XKB_IN_USE" -a ! -L /etc/X11/X ]; then
-    if grep '^exec.*/Xsun' /etc/X11/X > /dev/null 2>&1 && [ -f /etc/X11/XF86Config ]; then
-       xkbsymbols=`sed -n -e 's/^[     ]*XkbSymbols[   ]*"\(.*\)".*$/\1/p' /etc/X11/XF86Config`
-       if [ -n "$xkbsymbols" ]; then
-           setxkbmap -symbols "$xkbsymbols"
-           XKB_IN_USE=yes
-       fi
-    fi
-fi
-
-# xkb and xmodmap don't play nice together
-if [ -z "$XKB_IN_USE" ]; then
-    if [ -f "$rh6sysmodmap" ]; then
-       xmodmap "$rh6sysmodmap"
-    fi
-
-    if [ -f "$sysmodmap" ]; then
-       xmodmap "$sysmodmap"
-    fi
-
-    if [ -f "$usermodmap" ]; then
-       xmodmap "$usermodmap"
-    fi
-fi
-
-unset XKB_IN_USE
-
-xhost +si:localuser:`id -un` || :
-
-# run all system xinitrc shell scripts.
-if [ -d /usr/etc/X11/xinit/xinitrc.d ]; then
-    for i in /usr/etc/X11/xinit/xinitrc.d/* ; do
-	sname=$(basename "$i")
-        test -x "/etc/X11/xinit/xinitrc.d/$sname" && continue
-        if [ -x "$i" -a ! -d "$i" ]; then
-            . "$i"
-        fi
-    done
-fi
-if [ -d /etc/X11/xinit/xinitrc.d ]; then
-    for i in /etc/X11/xinit/xinitrc.d/* ; do
-        if [ -x "$i" -a ! -d "$i" ]; then
-	    . "$i"
-        fi
-    done
-fi
-
-if [ "x$command" = "xdefault" ] ; then
-  if [ -x "$HOME/.Xclients" ]; then
-    command="$HOME/.Xclients"
-  elif [ -x /etc/X11/xinit/Xclients ]; then
-    command="/etc/X11/xinit/Xclients"
-  elif [ -x /etc/X11/Xclients ]; then
-    command="/etc/X11/Xclients"
-  else
-    if [ -n "$zenity" ] ; then
-	disptext=`gettextfunc "System has no Xclients file, so starting a failsafe xterm session.  Windows will have focus only if the mouse pointer is above them.  To get out of this mode type 'exit' in the window."`
-      "$zenity" --info --text "$disptext"
-    else
-      echo "$0: Cannot find Xclients"
-    fi
-    exec xterm -geometry 80x24+0+0
-  fi
-fi
+echo "$0: Setup done, will execute: $command"
 
-# add ssh-agent if found
-sshagent="`gdmwhich ssh-agent`"
-if [ -n "$sshagent" ] && [ -x "$sshagent" ] && [ -z "$SSH_AUTH_SOCK" ]; then
-    command="$sshagent -- $command"
-elif [ -z "$sshagent" ] ; then
-    echo "$0: ssh-agent not found!"
+if [ -z "$command" ] ; then
+	command=failsafe
 fi
 
-echo "$0: Setup done, will execute: $command"
-
 eval exec $command
 
 echo "$0: Executing $command failed, will run xterm"
 
-if [ -n "$zenity" ] ; then
-	disptext=`gettextfunc "Failed to start the session, so starting a failsafe xterm session.  Windows will have focus only if the mouse pointer is above them.  To get out of this mode type 'exit' in the window."`
-	"$zenity" --info --text "$disptext"
-fi
-
 exec xterm -geometry 80x24+0+0