--- exim-4.66/src/EDITME.orig 2007-01-08 16:25:36 +0200 +++ exim-4.66/src/EDITME 2007-01-19 12:47:15 +0200 @@ -65,7 +65,8 @@ # also permitted to use the # character to add a comment to a setting, for # example # -# EXIM_GID=42 # the "mail" group +EXIM_GID=12 # the "mail" group +EXIM_UID=8 # # However, with some versions of "make" this works only if there is no white # space between the end of the setting and the #, so perhaps it is best @@ -100,7 +101,7 @@ # /usr/local/sbin. The installation script will try to create this directory, # and any superior directories, if they do not exist. -BIN_DIRECTORY=/usr/exim/bin +BIN_DIRECTORY=/usr/sbin #------------------------------------------------------------------------------ @@ -116,7 +117,7 @@ # don't exist. It will also install a default runtime configuration if this # file does not exist. -CONFIGURE_FILE=/usr/exim/configure +CONFIGURE_FILE=/etc/exim/exim.conf # It is possible to specify a colon-separated list of files for CONFIGURE_FILE. # In this case, Exim will use the first of them that exists when it is run. @@ -134,7 +135,7 @@ # owner of a local mailbox.) Specifying these values as root is very strongly # discouraged. -EXIM_USER= +EXIM_USER=mail # If you specify EXIM_USER as a name, this is looked up at build time, and the # uid number is built into the binary. However, you can specify that this @@ -155,7 +156,7 @@ # for EXIM_USER (e.g. EXIM_USER=exim), you don't need to set EXIM_GROUP unless # you want to use a group other than the default group for the given user. -# EXIM_GROUP= +EXIM_GROUP=mail # Many sites define a user called "exim", with an appropriate default group, # and use @@ -235,7 +236,7 @@ # This one is special-purpose, and commonly not required, so it is not # included by default. -# TRANSPORT_LMTP=yes +TRANSPORT_LMTP=yes #------------------------------------------------------------------------------ @@ -244,9 +245,9 @@ # MBX, is included only when requested. If you do not know what this is about, # leave these settings commented out. -# SUPPORT_MAILDIR=yes -# SUPPORT_MAILSTORE=yes -# SUPPORT_MBX=yes +SUPPORT_MAILDIR=yes +SUPPORT_MAILSTORE=yes +SUPPORT_MBX=yes #------------------------------------------------------------------------------ @@ -261,16 +262,16 @@ LOOKUP_DBM=yes LOOKUP_LSEARCH=yes -# LOOKUP_CDB=yes -# LOOKUP_DNSDB=yes -# LOOKUP_DSEARCH=yes +LOOKUP_CDB=yes +LOOKUP_DNSDB=yes +LOOKUP_DSEARCH=yes # LOOKUP_IBASE=yes # LOOKUP_LDAP=yes # LOOKUP_MYSQL=yes # LOOKUP_NIS=yes # LOOKUP_NISPLUS=yes # LOOKUP_ORACLE=yes -# LOOKUP_PASSWD=yes +LOOKUP_PASSWD=yes # LOOKUP_PGSQL=yes # LOOKUP_SQLITE=yes # LOOKUP_WHOSON=yes @@ -279,8 +280,8 @@ # LOOKUP_LSEARCH is enabled. However, we retain these for backward # compatibility. Setting one forces LOOKUP_LSEARCH if it is not set. -# LOOKUP_WILDLSEARCH=yes -# LOOKUP_NWILDLSEARCH=yes +LOOKUP_WILDLSEARCH=yes +LOOKUP_NWILDLSEARCH=yes #------------------------------------------------------------------------------ @@ -308,8 +309,9 @@ # specified in INCLUDE. The settings below are just examples; -lpq is for # PostgreSQL, -lgds is for Interbase, -lsqlite3 is for SQLite. -# LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/mysql/include -I /usr/local/pgsql/include -# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber -lmysqlclient -lpq -lgds -lsqlite3 +# LOOKUP_INCLUDE=-I /usr/include/ldap -I /usr/include/mysql -I /usr/include/pgsql +LOOKUP_INCLUDE=-I /usr/include -I /usr/include/db4 -I /usr/lib/perl/i386-linux/CORE +LOOKUP_LIBS=-L/usr/lib -lsqlite3 #------------------------------------------------------------------------------ @@ -330,14 +332,14 @@ # and the MIME ACL. Please read the documentation to learn more about these # features. -# WITH_CONTENT_SCAN=yes +WITH_CONTENT_SCAN=yes # If you want to use the deprecated "demime" condition in the DATA ACL, # uncomment the line below. Doing so will also explicitly turn on the # WITH_CONTENT_SCAN option. If possible, use the MIME ACL instead of # the "demime" condition. -# WITH_OLD_DEMIME=yes +WITH_OLD_DEMIME=yes #------------------------------------------------------------------------------ # Compiling Exim with experimental features. These are documented in @@ -348,18 +350,18 @@ # installed on your system (www.libspf2.org). Depending on where it is installed # you may have to edit the CFLAGS and LDFLAGS lines. -# EXPERIMENTAL_SPF=yes +EXPERIMENTAL_SPF=yes # CFLAGS += -I/usr/local/include -# LDFLAGS += -lspf2 +LDFLAGS += -lspf2 # Uncomment the following lines to add SRS (Sender rewriting scheme) support. # You need to have libsrs_alt installed on your system (srs.mirtol.com). # Depending on where it is installed you may have to edit the CFLAGS and # LDFLAGS lines. -# EXPERIMENTAL_SRS=yes +EXPERIMENTAL_SRS=yes # CFLAGS += -I/usr/local/include -# LDFLAGS += -lsrs_alt +LDFLAGS += -lsrs_alt # Uncomment the following lines to add Brightmail AntiSpam support. You need # to have the Brightmail client SDK installed. Please check the experimental @@ -473,11 +475,11 @@ # included in the Exim binary. You will then need to set up the run time # configuration to make use of the mechanism(s) selected. -# AUTH_CRAM_MD5=yes +AUTH_CRAM_MD5=yes # AUTH_CYRUS_SASL=yes -# AUTH_DOVECOT=yes -# AUTH_PLAINTEXT=yes -# AUTH_SPA=yes +AUTH_DOVECOT=yes +AUTH_PLAINTEXT=yes +AUTH_SPA=yes #------------------------------------------------------------------------------ @@ -494,7 +496,7 @@ # one that is set in the headers_charset option. The default setting is # defined by this setting: -HEADERS_CHARSET="ISO-8859-1" +#HEADERS_CHARSET="ISO-8859-1" # If you are going to make use of $header_xxx expansions in your configuration # file, or if your users are going to use them in filter files, and the normal @@ -514,7 +516,7 @@ # the Sieve filter support. For those OS where iconv() is known to be installed # as standard, the file in OS/Makefile-xxxx contains # -# HAVE_ICONV=yes +HAVE_ICONV=yes # # If you are not using one of those systems, but have installed iconv(), you # need to uncomment that line above. In some cases, you may find that iconv() @@ -576,10 +578,10 @@ # leave these settings commented out. # This setting is required for any TLS support (either OpenSSL or GnuTLS) -# SUPPORT_TLS=yes +SUPPORT_TLS=yes # Uncomment this setting if you are using OpenSSL -# TLS_LIBS=-lssl -lcrypto +TLS_LIBS=-lssl -lcrypto # Uncomment these settings if you are using GnuTLS # USE_GNUTLS=yes @@ -606,7 +608,7 @@ # auxiliary programs. If the include files are not in a standard place, you can # set TLS_INCLUDE to specify where they are, for example: -# TLS_INCLUDE=-I/usr/local/openssl/include/ +TLS_INCLUDE=-I/usr/include/openssl # or # TLS_INCLUDE=-I/opt/gnu/include @@ -643,7 +645,7 @@ # %s. This will be replaced by one of the strings "main", "panic", or "reject" # to form the final file names. Some installations may want something like this: -# LOG_FILE_PATH=/var/log/exim_%slog +LOG_FILE_PATH=/var/log/exim/%s.log # which results in files with names /var/log/exim_mainlog, etc. The directory # in which the log files are placed must exist; Exim does not try to create @@ -655,7 +657,7 @@ # files, by settings such as these # LOG_FILE_PATH=syslog -# LOG_FILE_PATH=syslog:/var/log/exim_%slog +# LOG_FILE_PATH=syslog:/var/log/exim/%s.log # The first of these uses only syslog; the second uses syslog and also writes # to log files. Do not include white space in such a setting as it messes up @@ -692,7 +694,7 @@ # files. Both the name of the command and the suffix that it adds to files # need to be defined here. See also the EXICYCLOG_MAX configuration. -COMPRESS_COMMAND=/usr/bin/gzip +COMPRESS_COMMAND=/bin/gzip COMPRESS_SUFFIX=gz @@ -700,7 +702,7 @@ # If the exigrep utility is fed compressed log files, it tries to uncompress # them using this command. -ZCAT_COMMAND=/usr/bin/zcat +ZCAT_COMMAND=/bin/zcat #------------------------------------------------------------------------------ @@ -709,7 +711,7 @@ # (version 5.004 or later) installed, set EXIM_PERL to perl.o. Using embedded # Perl costs quite a lot of resources. Only do this if you really need it. -# EXIM_PERL=perl.o +EXIM_PERL=perl.o #------------------------------------------------------------------------------ @@ -729,7 +731,7 @@ # support, which is intended for use in conjunction with the SMTP AUTH # facilities, is included only when requested by the following setting: -# SUPPORT_PAM=yes +SUPPORT_PAM=yes # You probably need to add -lpam to EXTRALIBS, and in some releases of # GNU/Linux -ldl is also needed. @@ -780,7 +782,7 @@ # /var/pwcheck) and chown it to exim's user and group. Once you have installed # pwcheck, you should arrange for it to be started by root at boot time. -# CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck +CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck #------------------------------------------------------------------------------ @@ -797,7 +799,7 @@ # group. Once you have installed saslauthd, you should arrange for it to be # started by root at boot time. -# CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux +CYRUS_SASLAUTHD_SOCKET=/var/run/saslauthd/mux #------------------------------------------------------------------------------ @@ -805,14 +807,15 @@ # this setting. See the manual section entitled "Use of tcpwrappers" in the # chapter on building and installing Exim. # -# USE_TCP_WRAPPERS=yes +USE_TCP_WRAPPERS=yes # # You may well also have to specify a local "include" file and an additional # library for TCP wrappers, so you probably need something like this: # # USE_TCP_WRAPPERS=yes -# CFLAGS=-O -I/usr/local/include -# EXTRALIBS_EXIM=-L/usr/local/lib -lwrap +CFLAGS=-I/usr/include +EXTRALIBS_EXIM=-lwrap -lpam -ldl +# -lradiusclient # # but of course there may need to be other things in CFLAGS and EXTRALIBS_EXIM # as well. @@ -838,7 +841,7 @@ # aliases). The following setting can be changed to specify a different # location for the system alias file. -SYSTEM_ALIASES_FILE=/etc/aliases +SYSTEM_ALIASES_FILE=/etc/exim/aliases #------------------------------------------------------------------------------ @@ -888,7 +891,7 @@ # CHGRP_COMMAND=/usr/bin/chgrp # MV_COMMAND=/bin/mv # RM_COMMAND=/bin/rm -# PERL_COMMAND=/usr/bin/perl +PERL_COMMAND=/usr/bin/perl #------------------------------------------------------------------------------ @@ -909,7 +912,7 @@ # it replaces the value with what is defined here. Commenting this setting # suppresses the check altogether. -TMPDIR="/tmp" +# TMPDIR="/tmp" #------------------------------------------------------------------------------ @@ -1082,7 +1085,7 @@ # (process id) to a file so that it can easily be identified. The path of the # file can be specified here. Some installations may want something like this: -# PID_FILE_PATH=/var/lock/exim.pid +PID_FILE_PATH=/var/run/exim.pid # If PID_FILE_PATH is not defined, Exim writes a file in its spool directory # using the name "exim-daemon.pid". @@ -1115,6 +1118,6 @@ # run time option is required to cause the moving actually to occur. Such # messages become "invisible" to the normal management tools. -# SUPPORT_MOVE_FROZEN_MESSAGES=yes +SUPPORT_MOVE_FROZEN_MESSAGES=yes # End of EDITME for Exim 4.