Group :: Sistema/Bibliotecas
RPM: libexplain
Main Changelog Spec Patches Sources Download Gear Bugs e FR Repocop
Patch: libexplain-1.4-typos.patch
Download
Download
Author: Andreas Beckmann <anbe@debian.org>
Description: fix typos found by Lintian
--- a/libexplain/buffer/ehostunreach.c
+++ b/libexplain/buffer/ehostunreach.c
@@ -27,7 +27,7 @@ explain_buffer_ehostunreach(explain_stri
(
sb,
/*
- * xgettext: This eror message is issued to explain an
+ * xgettext: This error message is issued to explain an
* EHOSTUNREACH error.
*/
i18n("the remote host does not appear to be connected to the "
--- a/libexplain/buffer/ehostunreach.h
+++ b/libexplain/buffer/ehostunreach.h
@@ -23,7 +23,7 @@
/**
* The explain_buffer_ehostunreach function may be used
- * to print an explaination of an EHOSTUNREACH error.
+ * to print an explanation of an EHOSTUNREACH error.
*
* @param sb
* The string buffer to print into.
--- a/libexplain/buffer/eisdir.h
+++ b/libexplain/buffer/eisdir.h
@@ -25,7 +25,7 @@ struct eisdir; /* forward */
/**
* The explain_buffer_eisdir function may be used to print an
- * explainaton for an EISDIR error, in the case where a file was to be
+ * explanation for an EISDIR error, in the case where a file was to be
* opened for writing.
*
* @param sb
--- a/libexplain/buffer/enametoolong.h
+++ b/libexplain/buffer/enametoolong.h
@@ -69,7 +69,7 @@ void explain_buffer_enametoolong2(explai
/**
* The explain_buffer_enametoolong_gethostname function is sued to
- * print an explaination for an ENAMETOOLONG error reported by the
+ * print an explanation for an ENAMETOOLONG error reported by the
* gethostname, getdomainname (etc) functions.
*
* @param sb
--- a/libexplain/buffer/enomedium.c
+++ b/libexplain/buffer/enomedium.c
@@ -339,7 +339,7 @@ explain_buffer_enomedium_generic(explain
sb,
/*
* xgettext: This error message is issued to explain an
- * ENOMEDIUM error, when a more specific explaination is not
+ * ENOMEDIUM error, when a more specific explanation is not
* available.
*/
i18n("the disk drive is a type that has removable disks, and there "
--- a/libexplain/buffer/errno/acl_set_file.c
+++ b/libexplain/buffer/errno/acl_set_file.c
@@ -224,7 +224,7 @@ explain_buffer_errno_acl_set_file_explan
* new ACL cannot be extended or the file system is out
* of file allocation resources.
*/
- explain_buffer_enospc(sb, pathname, "pathnme");
+ explain_buffer_enospc(sb, pathname, "pathname");
break;
case ENOTDIR:
--- a/libexplain/buffer/errno/mount.c
+++ b/libexplain/buffer/errno/mount.c
@@ -540,7 +540,7 @@ explain_buffer_errno_mount_explanation(e
(
sb,
/* FIXME: i18n */
- "target is still busy with open files or working diretories "
+ "target is still busy with open files or working directories "
);
return;
}
--- a/libexplain/buffer/errno/read.c
+++ b/libexplain/buffer/errno/read.c
@@ -159,7 +159,7 @@ explain_buffer_errno_read_explanation(ex
(
sb,
/* FIXME: i18n */
- "the file desriptor is attached to an object "
+ "the file descriptor is attached to an object "
"which is unsuitable for reading; or, the file was "
"opened with the O_DIRECT flag, and either the "
"address specified in data, the value specified "
--- a/libexplain/buffer/hstrerror.c
+++ b/libexplain/buffer/hstrerror.c
@@ -115,7 +115,7 @@ print_h_errno_description(explain_string
sb,
/*
- * xgettext: This message is used when hstreror is unable to translate
+ * xgettext: This message is used when hstrerror is unable to translate
* an h_errno value, in which causes this fall-back message to be used.
*/
i18n("unknown <netdb.h> error")
--- a/libexplain/buffer/strerror.c
+++ b/libexplain/buffer/strerror.c
@@ -42,7 +42,7 @@ explain_buffer_strerror(explain_string_b
explain_gettext
(
/*
- * xgettext: This message is used when streror (or strerror_r)
+ * xgettext: This message is used when strerror (or strerror_r)
* is unable to translate an errno value, in which ase this
* fall-back message is used. This does not occur with glibc,
* but other libc implemntations are more flakey.
--- a/libexplain/mktemp_on_error.c
+++ b/libexplain/mktemp_on_error.c
@@ -39,7 +39,7 @@ explain_mktemp_on_error(char *templat)
* made an empty string."
*
* So, instead of returning a NULL pointer like the vast majority of libc
- * functions, this one returns the orginal string, but sets the first byte
+ * functions, this one returns the original string, but sets the first byte
* to '\0'. Sheesh! This makes our job much harder.
*/
first = templat[0];
--- a/man/man1/explain.1
+++ b/man/man1/explain.1
@@ -41,7 +41,7 @@ explain \- explain system call error mes
.SH DESCRIPTION
The \*(n) command is used to decode an error return read from an
\f[I]strace\fP(1) listing, or silimar. Because this is being
-deciphered in a different process than the orginal, the results
+deciphered in a different process than the original, the results
will be less accurate than if the program itself were to use
\f[I]libexplain\fP(3).
.SS Functions
--- a/man/man1/explain_lca2010.1
+++ b/man/man1/explain_lca2010.1
@@ -988,7 +988,7 @@ tries to, you can't open a file in \f[CW
.E(
open_max = sysconf(_SC_OPEN_MAX);
.E)
-This one wan't so difficult, there is a \f[I]sysconf\fP(3) way of
+This one wasn't so difficult, there is a \f[I]sysconf\fP(3) way of
obtaining the limit.
.SS ENFILE, Too many open files in system
This error occurs when the system limit on the total number of open files
@@ -1242,7 +1242,7 @@ what \f[I]errno\fP(3) values may be retu
\[bu]
the cause of each error.
.PP
-Because of the OO nature of function call dispatching withing the
+Because of the OO nature of function call dispatching within the
kernel, you need to read \f[I]all\fP sources implementing that
\f[I]ioctl\fP(2) request, not just the generic implementation.
It is to be expected that different kernels will have different error
--- a/man/man3/explain.3
+++ b/man/man3/explain.3
@@ -137,8 +137,8 @@ Default: 0
.TP 8n
internal\[hy]strerror
This option controls the source of
-system eror message texts.
-If false, it uses \f[I]streror\P(3) for the text.
+system error message texts.
+If false, it uses \f[I]strerror\P(3) for the text.
If true, it uses internal string for the text.
This is mostly of use for automated testing, to avoid false negatives
induced by inconsistencies across Unix implementations.
--- a/man/man3/explain_chmod_or_die.3
+++ b/man/man3/explain_chmod_or_die.3
@@ -31,7 +31,7 @@ explain_chmod_or_die \- change permissio
void explain_chmod_or_die(const char *pathname, int mode);
.SH DESCRIPTION
The explain_chmod_or_die function is used to call the
-\f[I]chmod\fP(2) system call. On failure an explanation wiil be printed
+\f[I]chmod\fP(2) system call. On failure an explanation will be printed
to stderr, obtained from \f[I]explain_chmod\fP(3), and the the
process terminates by calling \f[CW]exit(EXIT_FAILURE)\fP.
.PP
--- a/man/man3/explain_lseek.3
+++ b/man/man3/explain_lseek.3
@@ -233,7 +233,7 @@ value of \f[I]errno\fP.
The original fildes, exactly as passed to the \f[I]lseek\fP(2) system call.
.TP 8n
\f[I]offset\fP
-The orginal offset,
+The original offset,
exactly as passed to the \f[I]lseek\fP(2) system call.
.TP 8n
\f[I]whence\fP
--- a/man/man3/explain_write.3
+++ b/man/man3/explain_write.3
@@ -121,7 +121,7 @@ explained and this function, because man
value of \f[I]errno\fP.
.TP 8n
\f[I]fildes\fP
-The orginal fildes, exactly as passed to the \f[I]write\fP(2) system call.
+The original fildes, exactly as passed to the \f[I]write\fP(2) system call.
.TP 8n
\f[I]data\fP
The original data, exactly as passed to the \f[I]write\fP(2) system call.
--- a/test/00/t0047a.sh
+++ b/test/00/t0047a.sh
@@ -23,12 +23,12 @@ TEST_SUBJECT="read EINVAL"
cat > test.ok << 'fubar'
read(fildes = 42, data = 0x00000100, data_size = 100) failed, Invalid
-argument (EINVAL) because the file desriptor is attached to an object which
-is unsuitable for reading; or, the file was opened with the O_DIRECT flag,
-and either the address specified in data, the value specified in data_size,
-or the current file offset is notsuitably aligned; or, the file descriptor
-was created via a call to timerfd_create(2) and the wrong size buffer was
-given
+argument (EINVAL) because the file descriptor is attached to an object
+which is unsuitable for reading; or, the file was opened with the O_DIRECT
+flag, and either the address specified in data, the value specified in
+data_size, or the current file offset is notsuitably aligned; or, the file
+descriptor was created via a call to timerfd_create(2) and the wrong size
+buffer was given
fubar
test $? -eq 0 || no_result